Bambu lab Cool Plate SuperTack Series for H3C
The Bambu Cool Plate SuperTack Pro for Bambu Lab H3C delivers ultra-strong first-layer adhesion for PLA and PETG filaments at significantly lower heatbed temperatures. Precision-sized to fit the 330 × 320 mm build volume of the Bambu Lab H3C, its durable 0.05 mm SuperTack coating on a 0.4 mm flexible spring steel base prevents corner lifting and warping on large prints without glue or frequent washing. It leaves a smooth, natural matte finish on the underside of models while reducing power consumption.
-
Free Delivery
-
Easy Returns
-
Adaptation Warranty
-
Top Brand
Related Products
Bambu Cool Plate SuperTack Pro — Designed for Bambu Lab H3C
Say Goodbye to Print Failures and Warping.
Engineered specifically to match the 330 × 320 mm print platform of the Bambu Lab H3C, the Bambu Cool Plate SuperTack Pro provides reliable, high-grip adhesion for PLA and PETG without requiring liquid adhesives or glue sticks. Its specialized polymer coating bonds firmly to your first layer even at reduced heatbed temperatures, preventing warping on large-format models and maximizing print reliability across long multi-material runs.
Why Choose the Cool Plate SuperTack Pro for Your H3C?
-
Ultra-Strong Adhesion at Low Heatbed Temperatures:
Prints PLA securely at just 45°C (compared to 65°C on standard Textured PEI plates), reducing heatbed energy consumption and helping prevent heat creep inside enclosed chambers.
-
Prevents Warping on Large-Format Prints:
High surface tack keeps wide footprints and sharp corners anchored flat throughout printing, making full use of the H3C's 330 × 320 mm build area.
-
Long-Lasting Coating Durability:
Built for repeated production runs, the SuperTack surface retains over 80% of its adhesion strength even after 300 prints (based on internal testing with PLA Basic).
-
Smooth, Natural Matte Bottom Finish:
Imparts a refined, low-glare matte texture onto the underside of printed parts so bottom surfaces blend naturally with vertical walls.
-
Effortless Maintenance Without Adhesives:
Requires no glue sticks or frequent washing. When needed, simply clean with mild detergent and water.
Usage & Care Guidelines
-
Safe Print Removal: The SuperTack coating is soft. Flex the spring steel plate gently or use the included scraper carefully at a shallow angle. If a large print holds too tightly, warm the heatbed to 50°C to ease release.
-
Material Restrictions: Do NOT print with TPU (including TPU 75A) or Bambu PLA Silk, as extreme adhesion will damage the coating or printed parts.
-
Cleaning & Normal Wear: Never clean with acetone or organic solvents. Slight filament color staining and gradual wear in the dedicated nozzle-wiping zone are normal and will not affect adhesion or print quality.