xTool D1 Pro 10W 2-in-1 kit (10W+1064nm infrared laser module)

xTool D1: Higher Accuracy DIY Laser Engraving & Cutting Machine

• Height Adjustment: Use 2 sets to increase the height of xTool D1 to 140mm to carve taller objects. Customize your skateboard or basketball to make them even cooler.
• 3-second Manual Focus: The new focus lever, slide-slot, and knob design allows you to adjust the focus in 3 seconds. Lower the focus lever, slide the laser head, and tighten the knob to fix the laser head position.
• Software and 3-way Connection: The xTool D1 is compatible with LightBurn and our beginner-friendly software Laserbox Basic. You can transfer data via Wi-Fi, USB cable, TF card and unleash your creativity anytime, anywhere. 

Ultrafine Lines with Compressed Spot Tech

Smaller laser focus (from 0.15*0.15mm to 0.08*0.06mm) makes impeccable detail, thanks to compresssed spot tech

100% Duplicate and Reprint Your Design

Easily and Precisely Adjust the Focus

Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever.

Limit Switches in All Directions

Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions.

Safe to Use

The emergency stop will be triggered by the detection of flames, smoke and tipping.

Better Software at Your Service

• Get started quickly with our user-friendly software: XCS : Updating Project Files, Batch Processing with Circular Array, Default Working Parameters for Materials
• Compatible with mature engraving software: LightBurn: The layout, editing, and control software for common laser cutter. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.

Details Matters

• New Protective Design for Laser: New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
• Large Engraving Area: A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
• The Risers: Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
• Just Connect: You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.