xTool D1 Pro 5W: Higher Accuracy Diode DIY Laser Engraving & Cutting Machine + D1 Pro 5W + RA2 Pro + Risers (8 Packs)

Only %1 left
SKU
xTool_P1030311
Manufacturer No
P1030311
Rating:
0 % of 100
As low as $859.99
Add to Wish List

You May Be Wondering - 5W is laser output power, which figures measure the capability of the machine to cut and 36W is the machine power of the laser machine

Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images

Description

xTool D1: Higher Accuracy DIY Laser Engraving & Cutting Machine

 

 

  • Height Adjustment: Use 2 sets to increase the height of xTool D1 to 140mm to carve taller objects. Customize your skateboard or basketball to make them even cooler.
  • 3-second Manual Focus: The new focus lever, slide-slot, and knob design allows you to adjust the focus in 3 seconds. Lower the focus lever, slide the laser head, and tighten the knob to fix the laser head position.
  • Software and 3-way Connection: The xTool D1 is compatible with LightBurn and our beginner-friendly software Laserbox Basic. You can transfer data via Wi-Fi, USB cable, TF card and unleash your creativity anytime, anywhere. 

 

Ultrafine Lines with Compressed Spot Tech

 

Smaller laser focus (from 0.15*0.15mm to 0.08*0.06mm) makes impeccable detail, thanks to compresssed spot tech


100% Duplicate and Reprint Your Design

 

Easily and Precisely Adjust the Focus

 

 

Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever.

 

Limit Switches in All Directions

 

Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions.

 

 

Safe to Use

 

The emergency stop will be triggered by the detection of flames, smoke and tipping.

 

Better Software at Your Service

 

  • Get started quickly with our user-friendly software: XCS : Updating Project Files, Batch Processing with Circular Array, Default Working Parameters for Materials
  • Compatible with mature engraving software: LightBurn: The layout, editing, and control software for common laser cutter. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.

 

Details Matters

  • New Protective Design for Laser: New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
  • Large Engraving Area: A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
  • The Risers: Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
  • Just Connect: You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.
Specification
Type xTool D1 Pro-20W   xTool D1 Pro-10W xTool D1 Pro-5W
Machine Power 120W 60W 36W
Laser Electric Power 84W 40W 25W
Laser Module Output Power 20W 10W 5W
Laser Spot 0.08*0.10mm 0.08*0.06 mm 0.06*0.06 mm
Routing Speed 400 mm/s  400 mm/s  400 mm/s 
Working Area  430 * 390 mm (16.93 * 15.35 inch) 430*400 mm(16.93*15.75 inch) 430*400 mm(16.93*15.75 inch)
Max. Workpiece Height 50 mm (2 inch) 50 mm (2 inch) 50 mm (2 inch)
Max. Workpiece Height with X risers   50mm+X*45mm(each set riser height column) 50mm+X*45mm(each set riser height column) 50mm+X*45mm(each set riser height column)
Connecting Interfaces USB/Wi-Fi/TF Card USB/Wi-Fi/TF Card USB/Wi-Fi/TF Card
Certification FCC / FDA / CE FCC / FDA / CE FCC / FDA / CE
Operating Systems Windows/macOS Windows/macOS Windows/macOS
Control Software xTool Creative Space / LightBurn xTool Creative Space / LightBurn xTool Creative Space / LightBurn
File Type(s) SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc.
Compatible Accessories RA2 Pro
Air Assist Set
xTool Smoke Purifier
Honeycomb Working Panel Set
Enclosure
xToolCare for xTool D1 Pro 20W
RA1
RA2 Pro
Air Assist Set
Smoke Purifier
Honeycomb Working Panel Set
Enclosure
xToolCare for xTool D1 Pro 10W
RA1
Same With xTool D1 Pro 10W

 

Customer Reviews

Be the first to review this product
0%

of customers recommend this product

5 Stars
0 %
4 Stars
0 %
3 Stars
0 %
2 Stars
0 %
1 Star
0 %
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account