Glowforge Air Filter - White 18.11x12.5x13.3in Box

SKU
GlowForge_GF-ASM-00275
Manufacturer No
GF-ASM-00275
Rating:
0 % of 100
$1,295.00
Add to Wish List

Manufacturer No -GF-ASM-00275

Glowforge Air Filter - White 18.11x12.5x13.3in Box. Lasers like your Glowforge require ventilation. All Glowforge printers come with a 4" (10 cm) diameter hose which allows you to use your Glowforge near a window. Our Air Filter upgrade lets you put your Glowforge anywhere. It sits on the ground near your Glowforge printer and cleans the air, allowing you to operate it anywhere in your home, school, or office.

Description

The Glowforge Air Filter lets you use your Glowforge anywhere in the home, school, or office. The size of a recycle bin, it cleans the air coming out of your Glowforge. If you don?t use an Air Filter, your Glowforge comes with everything you need to vent through a window.

What is the Glowforge Compact Filter?

Right from the start it seems Glowforge planned to have available a filter that would take the exhaust from the laser engraver and, rather than pump it outside, would take smoke into an enclosure, filtering it to produce clean air.

During production they hit some speed bumps, and came up with an alternative arrangement to serve folks who couldnā€™t wait for the planned version, but turned out to have its own advantages.

After attaching the filter, you need to set an option to tell the Glowforge interface the filter is being used, that way it uses the filter fan rather than depend on the vent fan that is in the engraver.

What is the difference between this and the planned filter unit?

Unlike the Glowforge branded filter that is still in development, this filter sits beside the laser, and is attached using vent tubing.

While not as elegant as sitting under the laser as is still planned for the first-party solution, it offers the opportunity to decide when you want to pump the smoke outside or into the filter. You can filter or vent, it is up to you.

It is mounted on wheels, so is quite a bit more portable than the planned Glowforge branded filter also.

What do you like about the Compact Filter?

As mentioned earlier, the main advantage is the whole purpose, and that is the filter means you donā€™t have to pump the smoke outside.

Cracking a window lets the cold in. As well as being not fun for humans, it is especially bad for the laser to be exposed to extreme cold, and that cold goes right up the vent into the machine if you are not careful.

Another advantage of the filter is it also keeps the sound in. Lasering can be noisy for your neighbours.

If you wanted to, you could take your Glowforge and Compact Filter and do demonstrations or personalized gifts at markets, conventions, and other events. Definitely something we are considering.

What is not good about it?
Right now it seems the filters, which are after all a consumable, fill up quickly.

The advice is to limit use of materials such as MDF to lengthen the useful life of the replaceable filters, which would be fine but 90% of what most of us engrave on our lasers is plywood, which has MDF inside.

This wouldnā€™t be bad if they were cheap, but all indications are these filters are going to be hundreds of dollars to replace, plus shipping from USA. Hundreds of dollars, heavy and bulky, plus cross-border will mean import duty and expensive shipping.

If there was a way to add a pre-filter that snags the largest particles, and sell the filters through Amazon or other regional options, some of these downsides would be mitigated somewhat.

As it is, this is still a better option than the first-party filter that will be attached under the laser so will not offer the option of venting outside and will be a pain in the butt each time the filter needs to be replaced.

Conclusion

While I have a gripe, it is minor in comparison to the benefit we received in being able to use our Glowforge right through -40c weather ā€“ essential as my wife launched a business off the back of the Glowforge that couldnā€™t take a vacation while the climate improved.

Iā€™d recommend checking out the Compact Filter to anyone with a Glowforge, and I would suggest it as another advantage the Glowforge has over other similar laser engraving systems.

Check out my original Glowforge Review for more information on why I prefer the Glowforge over any other laser I have owned or used.

Specification
Brand Glowforge Air Filter - White 18.11x12.5x13.3in Box
MFG  GF-ASM-00275
SKU GlowForge_GF-ASM-00275
UPC Code 811961030940
Color White
Pack White
Size 18.11x12.5x13.3in
Product Class RET

 

Customer Reviews

Be the first to review this product
0%

of customers recommend this product

5 Stars
0 %
4 Stars
0 %
3 Stars
0 %
2 Stars
0 %
1 Star
0 %
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account